Troubleshooting Method For Horizontal Band Saw Machine

Troubleshooting method for horizontal band saw machine:

If there is a situation of sawing during the work process, the workpiece should be separated from the sawing edge by force on both sides, and should not be reversed to prevent the saw blade from falling off. If there are situations such as running or shifting of the saw blade (the saw blade swings back and forth), the car should be stopped and the saw blade, saw material (road), saw card, saw wheel, etc. should be inspected. After the saw blade is operating normally, the saw should be cut again. When there is debris blocking the path of the saw blade on the workbench, use a wooden stick to pry it away and do not use your fingers to pry it. To prevent resin sawdust from sticking to the surface of the saw blade and saw wheel, and to increase friction and resistance between the saw blade and saw wheel, kerosene can be used for cleaning during work.